94 sonoma

[Fluffy Bully]

I was asked to start a built thread so people can see more of my truck. I dont know much about it but what I was told when I bought it and just diggin around in it . I got some pics of the engine its a vortec 350 it hard to get any because it is a tight fit. So if you want any more just ask and can take whatever. I took some of the 4link front and the rear is just lift blocks and leafs we have all seen that. The motor tranny and tcase all came out of 97 chevy 1500. I know that he said that to put the motor in they had to use short header they where skinny and smaller to fit (slide in). The front is just a d44 with a detriot locker in and upgrade shafts and joints. The rear is a 12 bolt welded. Dics brakes on all four. Has rancho rs5000 shock he said it had 16 inches of lift but I think he meant with every think tires included.

[Fluffy Bully]

finished product
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4255.jpg
motor
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4251.jpg
computer
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4252.jpg
not much room
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4253.jpg
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4254.jpg
4link
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4258.jpg
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4260.jpg
http://i267.photobucket.com/albums/ii297/generaldot/IMG_4257.jpg

[PRINCETON_JAKE]

Are the 4 link bars on the rear axle all mounted at the same hieght?

[chevyfan]

looks like a fun truck too play with :)

[leadfoot]

i used the same turn buckels for mine they work good but they are kind've weak nice pics and truck

[Fluffy Bully]

Are the 4 link bars on the rear axle all mounted at the same hieght?

no 4link in rear its just leafs for now


Sweet! , Hey thanks for getting the pics. I know you don’t know much about the engine but this is a swap that people will really be interested in seeing.
What did he do for the dash? Do you know? Wish you didn’t live so far away, would like to get a better look at the harness and sh!t. does it use the Sonoma tank?
Thanks again.

no prob i can drive to show you half way or so or you can look at it at a run the dash is stock sonoma all the gauges work on it he put extra tranny gauge and one other dont know it not hook up and still uses athe stock gas tank but has the fuel pump out of the truck everything else is out of so it has the right fuel pressure and stuff

[dustinfloyd2002]

looks to need a new air filter

[Team Goochie]

When do you plan to see the 1st mud with that sweet ride?

[Thumper]

looks like a fun truck

[P&JK5]

sweet pics, now thats a mud truck if i ever seen one id mud that anywhere anytime

[burbillac]

I agree time for a new air filter! Nice ride how's she run in the mud?

[mudtrux]

Can you plumb that air filter to inside the cab or get a air box around it.
Not bad if every one's only picking on your air filter 'eh?

[Fluffy Bully]

looks to need a new air filter
yeah i know it coming but i need a shift cable first


When do you plan to see the 1st mud with that sweet ride?
all ready had it out twice it does its job but i will have it at buffalo to reveal if i can find a 4 or 5 ft b&m shift cable

[dustinfloyd2002]

well find that cable and bring her out

[muddyscout]

sorry fluffy but thats not a mud truck cause you didnt build it you bought it











the pics dont do it justice it looks way better in person

[Fluffy Bully]

well find that cable and bring her out

it has the eye loop at one and a screw at the other end i checked at all the parts stores here and nobody can get it or if the can it is a two week wait

[mudevil]

Summit or Jegs can have you one in 2 days. Just had a 5ft B&M cable delivered to me today for my sons truck.

[Fluffy Bully]

never thought of that wounder if the wife would let me use her credit card

[sab80chev]

Only one way to find out.

[Army boy]

very nice looking truck man

[bender77]

never thought of that wounder if the wife would let me use her credit card

just use it. It's easier to ask for forgiveness than permission.

[Thumper]

just use it. It's easier to ask for forgiveness than permission.

so true

[mudevil]

just use it. It's easier to ask for forgiveness than permission.

You seem to know this from experience.

[Fluffy Bully]

i asked and she said if i cant pay with cash then i dont needed it

[sab80chev]

i asked and she said if i cant pay with cash then i dont needed it

Next time she uses the card tell her the same thing.:D:D

[Fluffy Bully]

Next time she uses the card tell her the same thing.:D:D

i try but like that thing i get once in a while she said she cut them up already so its cask or check card get us (me) in trouble

[muddingrizz]

Check card will work if it has a visa logo or other kind, I use mine for summit all the time.

[Fluffy Bully]

ok so I havent put anything in my build tread for a while got every thing fix and running good now i am going to put headers out the hood in the next week or so

but i got some tires (16.5L/16.1) and put them on today but i a dumb a$$ cause i put them on in the garage with a 8ft door

http://i267.photobucket.com/albums/ii297/generaldot/DSCF0001.jpg

[Team Goochie]

Hey everything went good for you then, I'm guessing?

[Fluffy Bully]

they are about 1 or 2 from rubbing good thing i pick this body lift so its going up 3 inches

[Team Goochie]

I'm glad things went well. You should try to get a more clear picture of it with the tires on it. But it does look good from what I can see.

[Fluffy Bully]

Hey everything went good for you then, I'm guessing?

nobody wanted to do it but found a place that mounted them well 3 of the 4 cause the 4 has a little 1/4 weather crack on the bead so they said they wont do it cause i could blow it off so me and a friend are going to man handle it and put it on

[Fluffy Bully]

I'm glad things went well. You should try to get a more clear picture of it with the tires on it. But it does look good from what I can see.

i will get one when i get it out the garage tommorow

[Mud Patrol]

so does this mean you dont need the radiator anymore?

[Fluffy Bully]

so does this mean you dont need the radiator anymore?

still do but i fixed mine for right now but who know it my fix will work

[Team Goochie]

sounds good man. hopefully you make it to the snow run!

[Mud Hugger]

nice!! youll love the tractors.

[73CJ]

Now you got some lugs! Did you get er out of the garage yet?

[93cherokee]

cant wait to see it in action!!

[KrazyK5er]

did you bring this to snowfest??

[jon19802]

yes he did