View Full Version : Carborated 350 small block and 350 turbo tranny
ChevyUnlimited
06-20-2006, 12:34 AM
I'm looking for a carburated 350 s.b. anything from 73 to 87 i mainly want a block thats in good shape to use a rebuild kit on it and then i am looking for a 350 turbo tranny... if i buy a carb. 350 i will be putting a Fuel Injected GM Goodwrench Rebuild 350 for sale
77fordf-150
06-20-2006, 07:58 AM
Can't you just take all of your ful injected crap off and slap on a new intake and carb like Joey did? Wiring it will suck though
ChevyUnlimited
06-20-2006, 11:05 AM
because i can usually get a carb 350 for pretty cheap because i dont care if it even runs as long as the blocks in good shape so i'll use a rebuild kit and if the blocks scratched up and **** on the inside i'll boar it out... then i could make some money off the fuel injected 350
ox_man
06-20-2006, 09:03 PM
i have a 350 .40 over needs rings, bearings, cam and topend, pistons are good still, but never checked the crank
ChevyUnlimited
06-20-2006, 09:16 PM
i have a 350 .40 over needs rings, bearings, cam and topend, pistons are good still, but never checked the crank
how much you want for that
ox_man
06-21-2006, 01:14 PM
150 sound fair, i have most of the parts to go with too if you want them let me know
ChevyUnlimited
06-21-2006, 01:15 PM
whats year truck is it out of and exactly what parts dont you have
ox_man
06-21-2006, 01:31 PM
not excatly sure of the year, though i'm figuring 76-79ish i have the stock heads, intake, oilpan, water pump fuel pupm i think. the oil pump is screwed. the kid that i bought if from must have rebuilt and used too much silcone and some was stuck to the oilpickup. only reason why the motor was pulled a part was because it poped/backfired and it was burning oil
ChevyUnlimited
06-21-2006, 01:37 PM
i see, well i'll get back to you about that i have another guy to talk to yet about one
TowMan
10-02-2006, 07:59 PM
got a 73 out of a burban check the for sale section i also have 2 wd th350s for $150 each
I have a 350t w/shift kit and a stall converter, also have a 670 truck advenger carb if your interested
WRECK$HIT
10-27-2006, 06:29 PM
how much for the 670 truck advenger?
how much for the 670 truck advenger?
$275.00 Make me an offer, Its 1 year old
wizard
10-27-2006, 10:13 PM
how much for the tranny with shift kit is it 2wdrive or four need 2 or just the stall convert
four wheel drive, $350.00, good working tranny,low use on it.
TowMan
10-28-2006, 11:59 AM
do you still need a motor? got a good one
ChevyUnlimited
10-29-2006, 05:01 PM
i dont need a tranny anymore picked one up a bit ago, dont need the motor anymore unless its a deal i cant pass.. i do want a motor just to build up real nice if ya got one that doesnt run or somthing and you'll sell it cheap
77fordf-150
10-29-2006, 08:36 PM
John check Vans auto for a bed. I drove through there today and there are alot of chevy's. Haha no suprise there.
Powered by vBulletin™ Version 4.0.5 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.